|
|
|
|
Available Regions:
|
| Specification | Description | HPU-4M670 |
|---|
| Wattage | Rated wattage | 670 Watts | | Peak load | 720 Watts | | Switch Type | Manual | Rocker | | Auto standby | ATX Logic | | Fan (Exhaust) | RPM | 1500 ~ 3100 RPM | | Bearing type | Dual Ball Bearing | | Dimension | 80 x 80 x 25 mm
3.1" x 3.1" x 1.0" | | Position | Rear | | Input Parameter | Voltage range | 100 - 240V | | Current | 9A | | Frequency range | 50 - 60 Hz | | Form Factor | ATX12V | 2.2 | | EPS12V | 2.91 | | Efficiency | - | up to 80% | | Output Parameter | +5v (± 5%) | 0.5A - 30A | | +12v 1 (± 5%) | 0.5A - 16A | | +12v 2 (± 5%) | 0.5A - 16A | | +12v 3 (± 5%) | 0.5A - 16A | | +12v 4 (± 5%) | 0.5A - 16A | | -5V (± 10%) | - | | -12v (± 10%) | 0A - 0.8A | | +5vsb (± 5%) | 0A - 3A | | +3.3v (± 5%) | 0.5A - 25A | | Ripple & Noise | +5V, +5VSB, +3.3V | - | | +12V,-12V | - | | Output Load Regulation | +12v1 & +12v2 & +12v3 & +12v4 | < 624W (52A) | | +3.3v & +5v | < 170W | | +3.3v, +5v & +12v | < 655W | | Output Voltage Protection | +3.3v | < 4.5V | | +5v | < 6.5V | | +12v | < 14.5V | | Power Good Signal | Rise Time | < 10 ms | | Signal on | 100 - 500 ms | | Signal off | < 1 ms | | Power hold | 16 ms min | | Environments | Operating Temperature | - | | Humidity | - | | PFC | Power Factor correction | Active | | Chassis | Thickness | 1.0 mm | | Unit Size | Dimension | 150 x 180 x 86 mm
5.9" x 7.1" x 3.4" | | Weight | Net weight | 3.0 kg |
|
|
|
|
|
|
