|
|
|
|
Available Regions:
|
| Specification | Description | HPU-4M530 |
|---|
| Wattage | Rated wattage | 530 Watts | | Peak load | 580 Watts | | Switch Type | Manual | Rocker | | Auto standby | ATX Logic | | Fan (Intake) | RPM | V2: 700 ~ 1800 RPM
V3: 1000 ~ 2000 RPM | | Bearing type | Sleeve Bearing | | Dimension | 120 x 120 x 25 mm
4.7" x 4.7" x 1.0" | | Position | Bottom | | Input Parameter | Voltage range | 195 - 240V (US: 100 - 120V) | | Current | V2: 6A (US: 10A)
V3: 4A (US: 10A) | | Frequency range | 50 - 60 Hz | | Form Factor | ATX12V | 2.2 | | EPS12V | | | Efficiency | - | V2: 76%
V3: 80% | | Output Parameter | +5v (± 5%) | V2: 2A - 34A
V3: 2A - 30A | | +12v 1 (± 5%) | V2: 1A - 18A
V3: 2A - 18A | | +12v 2 (± 5%) | V2: 1A - 17A
V3: 2A - 18A | | +12v 3 (± 5%) | - | | +12v 4 (± 5%) | - | | -5V (± 10%) | - | | -12v (± 10%) | 0A - 0.8A | | +5vsb (± 5%) | 0A - 2.5A | | +3.3v (± 5%) | 0.5A - 28A | | Ripple & Noise | +5V, +5VSB, +3.3V | - | | +12V,-12V | - | | Output Voltage Protection | +3.3v | < 4.5V | | +5v | < 6.8V | | +12v | < 15.6V | | Power Good Signal | Rise Time | < 20 ms | | Signal on | 100 - 500 ms | | Signal off | < 1 ms | | Power hold | 16 ms min | | Environments | Operating Temperature | - | | Humidity | - | | PFC | Power Factor correction | Active (N/A for US model) | | Chassis | Thickness | 1.0 mm | | Unit Size | Dimension | 150 x 140 x 86 mm
5.9" x 5.5" x 3.4" | | Weight | Net weight | 2 kg |
|
|
|
|
|
|
